[CompanyName] Customer Support -- Tech Note #1

Title of the Technical Note:
Subtitle of the Technical Note

Applies to: [ProductName] Release 1.
Last updated: Tuesday August 28, 2007.

SUMMARY

This is a brief description of the problem, and any solutions provided in this article. This is a brief description of the problem, and any solutions provided in this article. This is a brief description of the problem, and any solutions provided in this article. This is a brief description of the problem, and any solutions provided in this article. This is a brief description of the problem, and any solutions provided in this article. This is a brief description of the problem, and any solutions provided in this article.

Note: This is an explanation of an important point.

PROCEDURE

  1. This is the one-sentence description of Step One.

    Whenever file names are mentioned, such as C:\AUTOEXEC.BAT, use the fixed-width character formatting option.

    Whenever menu options are mentioned, such as File->Open, use the same technique.

    If you need to show the contents of a disk file, place it in a formatted paragraph, and then make it bold so it's obvious where the quoted content begins and ends. Like this: 

    C:\EZSCSI\MSCDEX.EXE /D:ASPICD0 /M:12
C:\DOS\SMARTDRV.EXE /X
@ECHO OFF
PROMPT $p$g
PATH C:\WINDOWS;C:\DOS
SET TEMP=C:\DOS

    Place alternatives or side notes in indented italics like this. For example, you might point out that the user's path options may be different than what is shown above.

    Save your changes.

  2. This is the one-line description of Step Two.

    Try to break up steps into a series of short paragraphs. Another good technique is to show the user "before" and "after" snapshots, using either formatted text paragraphs or screen shots.

    Save your changes.

  3. This is the one-line description of Step Three.

    You have completed the procedure.

Welcome to Physics I at RPI for Fall 2007!

We post important announcements here, at the bottom of each page.  All of the information you need to know about the course is posted on this site.  Add it to your list of “favorite sites” (I know, I know...) and check often.

If you are using Microsoft Windows Vista, you need to upgrade to LoggerPro 3.5. Follow this link for instructions.

If you are having trouble connecting your laptop to the LabPro device when you attach the USB cable, check this possible workaround.

You can download copies of the first exam and its solutions, the second exam and its solutions, and the third exam and its solutions.

There will be Supplemental Instruction for Physics 1 by Asantha Kempitiya Mondays and Thursdays 8-10pm in DCC 235.  (This is a change from the original location.)

The optional review for exam 3 will be held Tuesday, Nov. 27, from 6:00 to 7:30 pm, in DCC 308.