#include "DYNAcomm.h"

Cr - no longer using parameters
#if 0



Cr  - Define basic high level DYNASMART core simulation commands
      
      INTEGER DYNA_STEP,DYNA_DONE,DYNA_INIT_SIM,DYNA_STATS
     +     ,DYNA_STATUS,DYNA_QUIT,DYNA_RUN
      
Cr    NOTE: Run/Step commands are all those commands > 0
      PARAMETER(DYNA_STEP     =  1)
      PARAMETER(DYNA_DONE     =  0)
      PARAMETER(DYNA_INIT_SIM = -1)
      PARAMETER(DYNA_STATS    = -2)
      PARAMETER(DYNA_STATUS   = -3)
      PARAMETER(DYNA_QUIT     = -999999)
      PARAMETER(DYNA_RUN      = 999999)
      
      
Cr  - Define low level DYNASMART core simulation commands
      
      INTEGER DYNA_LINK_PASS_1,DYNA_NODE_PASS,DYNA_LINK_PASS_2
     +     ,DYNA_UPDATE_PATHS,DYNA_PENALTY_CAL
     +     ,DYNA_PRE_STEP_HOOKS,DYNA_POST_STEP_HOOKS
      
      PARAMETER(DYNA_LINK_PASS_1=-101)
      PARAMETER(DYNA_NODE_PASS=-102)
      PARAMETER(DYNA_LINK_PASS_2=-103)
      PARAMETER(DYNA_UPDATE_PATHS=-104)
      PARAMETER(DYNA_PENALTY_CAL=-105)
      PARAMETER(DYNA_PRE_STEP_HOOKS=-106)
      PARAMETER(DYNA_POST_STEP_HOOKS=-107)

Cr  - Define low level DYNASMART co-simulation commands
      INTEGER DYNA_COSIM_UPDATE

      PARAMETER(DYNA_COSIM_UPDATE=-201)
      
      INTEGER DYNA_COSIM_INTRAS_MOVE
      
      PARAMETER(DYNA_COSIM_INTRAS_MOVE=-210)
      
      
Cr  - Define high level DYNASMART maintainance commands
      INTEGER DYNA_CONNECT_GRAPHTOOL
     +     ,DYNA_GRAPHTOOL_SHOW_NODE
     +     ,DYNA_GRAPHTOOL_SHOW_LINK
     +     ,DYNA_CONNECT_DYNAVIEW
     +     ,UPDATE_DYNAVIEW
      PARAMETER(DYNA_CONNECT_GRAPHTOOL = -301)
      PARAMETER(DYNA_GRAPHTOOL_SHOW_NODE = -302)
      PARAMETER(DYNA_GRAPHTOOL_SHOW_LINK = -303)
      PARAMETER(DYNA_CONNECT_DYNAVIEW  = -310)
      PARAMETER(UPDATE_DYNAVIEW   = -311)
      
      INTEGER DYNA_NETCOMMAND
      PARAMETER(DYNA_NETCOMMAND=-401)
      
      INTEGER DYNA_SHOW
      PARAMETER(DYNA_SHOW   =-501) 
      
      INTEGER DYNA_SHOW_LINK,DYNA_SHOW_NODE
      INTEGER DYNA_SHOW_MOVEMENT,DYNA_SHOW_VEHICLE
      INTEGER DYNA_SHOW_PATH,DYNA_SHOW_CMS
      INTEGER DYNA_SHOW_ZONE
      PARAMETER(DYNA_SHOW_LINK     = -601)
      PARAMETER(DYNA_SHOW_NODE     = -602)
      PARAMETER(DYNA_SHOW_MOVEMENT = -603)
      PARAMETER(DYNA_SHOW_VEHICLE  = -604)
      PARAMETER(DYNA_SHOW_PATH     = -605)
      PARAMETER(DYNA_SHOW_CMS      = -606)
      PARAMETER(DYNA_SHOW_ZONE     = -607)
      
      
      INTEGER DYNA_CHANGE_INPUT
      INTEGER DYNA_ADD_NODE,DYNA_ADD_LINK,DYNA_ADD_MOVEMENT
     +     ,DYNA_ADD_ZONE
      
      PARAMETER(DYNA_CHANGE_INPUT  = -701)
      PARAMETER(DYNA_ADD_NODE      = -711)
      PARAMETER(DYNA_ADD_LINK      = -712)
      PARAMETER(DYNA_ADD_MOVEMENT  = -713)
      PARAMETER(DYNA_ADD_ZONE      = -714)
      
      INTEGER DYNA_SET_CMS,DYNA_SET_CMS_MSG
      PARAMETER(DYNA_SET_CMS       = -811)
      PARAMETER(DYNA_SET_CMS_MSG   = -812)
      
      INTEGER DYNA_UPDATE_SIGNAL
      PARAMETER(DYNA_UPDATE_SIGNAL = -821)
      
      INTEGER DYNA_SET_DETECTION_LEVEL
      PARAMETER(DYNA_SET_DETECTION_LEVEL = -831)

      INTEGER DYNA_INJECT_INCIDENT
      PARAMETER(DYNA_INJECT_INCIDENT = -901)
      
      INTEGER HYBRID_INTEGRATE
      PARAMETER(HYBRID_INTEGRATE   = -1001)


Cr  - General Operational Parameters
      INTEGER MAX_STEPS
      PARAMETER(MAX_STEPS = 9999)

#endif