The following instructions apply to Pro/Engineer on Unix and Windows.
When creating a drawing pick one of the standard Sizes (in inches):
A 8 1/2 x 11
B 11 x 17
C 17 x 22
D 22 x 34
E 34 x 44
F 28 x 40
or a metric size (in mm):
A4 210 x 297
A3 297 x 420
A2 420 x 594
A1 594 x 841
A0 841 x 1189
If you want a size other than those listed, choose "variable", and fill in your values for the dimensions.
Create your drawing using Pro/Engineer and then, when you are ready to print, select Print... from the File menu. In the Print window, select "Generic Color Postscript" as the Destination and then click Configure.... From the drop down choices for Size, select the same height and width you chose when you created the drawing. Select the Printer tab, and under Rotation (at the bottom), select "Spin 90".
Finally, in the box for Plotter Command, type the command to send to the plotter. What you type depends on the platform you are using and the plotter you are selecting. For example, to send to vcplt, you would type the following.
On Windows: print /d:\\sambasrv\vcplt
On Unix: lpr -Pvcplt
On Windows, don't forget to connect to sambasrv (using the RCS Files and Printer Sharing icon) before printing.
Return to ARC home page.
Please send comments and suggestions to consult@rpi.edu.