|Mechanical Engineers Win First Place at ASME Design Competition
For the second year in a row, a pair of Rensselaer students took first place at the annual Student Manufacturing Design Competition held by the American Society of Mechanical Engineers (ASME).
Mechanical engineering doctoral students Casey Hoffman and Jaron Kuppers won top honors in the national competition last month for their innovative Specialized Elastomeric Tooling (SET) process. The SET process offers a new method for curing advanced composites, which are highly customizable materials frequently used in a range of critically important applications from aircraft to windmill blades to biomedical devices. The new process is significantly less expensive and requires 500 to 1,000 times less energy than the conventional curing method used around the globe.
The competition, held in mid-October at the 2010 ASME International Manufacturing Science and Engineering Conference in Erie, Pa., was established in 1995 and is among the leading national manufacturing and design competitions for undergraduate and graduate students. Hoffman and Kuppers presented at the event, and were accompanied by faculty project sponsor Daniel Walczyk, associate professor of mechanical, aerospace, and nuclear engineering.
“It’s a large international conference, with students from many other top engineering programs entering the competition, so it’s really exciting to have won first place,” said Hoffman, who invented the SET process and was also a finalist in the 2010 Lemelson-MIT Rensselaer Student Prize. Hoffman received his bachelor’s degree in physics from Moravian College in Bethlehem, Pa., and his master’s degree in mechanical engineering from Rensselaer.
“The competition was tough, but we worked really hard on our project, and in the end our efforts paid off,” said Kuppers, who added a computational 3-D modeling aspect to the project, to optimize the shape of molds used in the SET process. Kuppers received his bachelor’s degree from Worcester Polytechnic Institute and master’s degree from Rensselaer, both in mechanical engineering. Kuppers co-chairs the Student Sustainability Task Force at Rensselaer.
Despite their strength and versatility, the potential of advanced composites is limited because the materials are difficult and expensive to produce. The patent-pending SET process put forth by Hoffman and Kuppers replaces the need for autoclaves energy-intensive machines that cost hundreds of thousands of dollars in composites manufacturing.
The SET process holds the potential to trim the manufacturing cost of advanced composites, and widen the playing field of businesses that can afford to research and manufacture these materials. The process involves curing a composite laminate by pressing the material between heated, rubber-lined molds. Heating occurs quickly because the composite is in direct contact with the tool. The shape of the rubber mold half is derived computationally using 3-D computer modeling and simulations.
Overall, the SET process results in up to a 1,000-fold energy savings over an autoclave and eliminates the need for expensive consumable materials that are sent to a landfill after each use. The time required to prepare a composite part for curing in an autoclave is a few hours, while it takes less than 10 minutes to perform the prep on a SET system. The award-winning student innovation adds intellectual value to the age-old manufacturing method, while keeping the process simple enough for implementation in industry. The research is sponsored by Kintz Plastics Inc. in Howes Cave, N.Y., and the New York State Energy Research and Development Authority.
“The ASME Student Manufacturing Design Competition is arguably the most prestigious U.S. competition for undergraduate and graduate students working on manufacturing research and development. The fact that Jaron and Casey placed first and two other student groups were finalists in this competition is evidence that Rensselaer runs a world-class manufacturing program,” said Walczyk. “I believe that Rensselaer faculty and students will continue to play a leading role in demonstrating U.S. manufacturing excellence and helping prevent further erosion of manufacturing jobs, especially in the advanced composites arena.”
At this year’s ASME Student Manufacturing Design Competition, three of the nine finalists were from Rensselaer. Along with the team of Hoffman and Kuppers, Rensselaer mechanical engineering senior Kyle Mattson presented his manufacturing design, “Puckman Tape Dispenser,” and mechanical engineering graduate student David Guglielmo presented his project, “Athletic Tape Cutter and Cleat Wrench.”
In 2009, a team consisting of Rensselaer mechanical engineering doctoral students Christina Laskowski and Todd Snelson, along with mechanical engineering senior Saadia Safir, won first place at the Student Manufacturing Design Competition for their “Sustain-a-Pet” project. In 2008, a team of Rensselaer students took second place in the ASME Student Manufacturing Competition for their method to produce and assemble rocket-shaped candy dispensers. Additionally, in 2007 another Rensselaer team on which Hoffman was a member placed second for their method to produce small crystal replicas of the then-uncompleted Curtis R. Priem Experimental Media and Performing Arts Center.
For more information on past Rensselaer winners of the ASME student manufacturing competition, visit http://green.rpi.edu/archives/sustain-a-bear/index.html or www.rpi.edu/about/inside/issue/v3n1/candy.html. For more information on manufacturing at Rensselaer and the Advanced Manufacturing Lab, visit www.eng.rpi.edu/manufacturing/.